"I love The Jolida Portal — BLACK ICE AUDIO"

2022-09-16 18:11:40

Skip to Content JD 1000 BRC 100 watts per channel of hi-performance sound. This amp has the power to drive 82 dB sensitivity speaker. It has drive and dynamics to make full symphonies or hard rock come to exciting life. But this amplifier has a gentle side as well and can deliver all the nuances of a delicate sound. Clear, robust bass with smooth highs and an image as large as your room in a value priced package. Remote volume control and an EZ-Biasing system make the operation and the maintenance of the JD 1000 BRC a simple matter. Rated Output Power: 100 W per channel at 8 ohms, 25Hz to 70KHz Maximum Power Output: 150 W per channel at 8 ohms, 1KHz Frequency Response: (at 1 watt into 8 ohms) 8Hz to 130KHz + 1dB Bandwidth: 13Hz to 80kHz + 3dB; 0dB 100 W 1KHz Distortion THD: Less than 1% at 100 W output, 28Hz to 15KHz Circuit Type: Ultra Linear, Class AB1 Input Impedance: 100Kohms Input Sensitivity: 500mV at 1KHz and 8 ohms for 100-watt output Output Impedance: 4 ohms and 8 ohms Negative Feedback: Less than 5 dB Noise and Hum: 85dB below rated output Tube Complement: 4 matched pairs (8) of 6CA7/EL34 power output; 2 pcs. 12AX7 pre-amplifier; 2 pcs. 12AT7/ECC81 power drivers. Power Requirements: 110V-120 VAC 60Hz 90 watts-standby, 240 watts maximum (220 VAC 50Hz option) Dimensions: 17 1/8 inches wide by 16 inches deep by 9 7/16 inches high Weight: 62 pounds net, approximately 74 pounds packaged Warranty: Two year limited parts and labor. One year or 1000 hours whichever comes first on Jolida Tubes. Bias Settings: 400 millivolts + 40 mV Fuse: 110 - 120 VAC, 6.3 Amp Slo Blo ; 200 - 240 VAC, 3 Amp Slo Blo Legacy Jolida Audio Product Information Fusion 801 The Fusion 801 is a makeover of a favorite model the JD 801BRC. We have kept all the well liked sound characteristics of the older model and improved the unit with an easy interchange of 6550 or El34 tubes, lower noise, increased clarity and a smooth presentation with midrange weight and enhanced 3 dimensionality. With its distinctive good looks and power the Fusion 801 can be a step up for your music pleasure. Rated Output Power:70 W per channel at 8 ohms, 25Hz to 60KHz with 6550 Tubes 60 W per channel at 8 ohms, 28Hz to 72KHz with EL 34 Tubes Maximum Power Output:95 W per channel at 8 ohms, 1KHz with 6550 Tubes 85 W per channel at 8 ohms, 1KHz with EL34 Tubes Frequency Response:(at 1 watt into 8 ohms) 6Hz to 48KHz + 1dB; 0dB at 1KHz Bandwidth:14Hz to 70KHz + 3dB; 0dB = 70 W 1KHz, 8 ohms Distortion THD + N:Less than 1% at 11V output, 49Hz to 20KHz, 8 ohms Circuit Type:Ultra Linear, Class AB1 Input Impedance:Less than 100Kohms Input Sensitivity:Max. 550mV at 1KHz for 70 watt output Output Impedance:4 ohms and 8 ohms Negative Feedback:Less than 5 dB Noise and Hum:80 dB below rated output Tube Complement:2 pairs (4) of 6550/KT88 or EL34/6CA7 power output tubes; 1 pcs. 12AX7A preamplifier; 2 pcs. 6SN7GT power drivers Power Requirements:110V-120 VAC 60Hz 250 watts-standby, 500 watts maximum (220 VAC -240 VAC 50Hz option) Dimensions:18.25 inches (46.5 cm) wide by 13.5 inches (34.5 cm) deep by 8.5 inches (22 cm) high Weight:53 pounds (24 Kg) net, approximately 57 pounds (26 Kg) packaged Fuse:For 110/120 VAC: 6.3 amp slo blo, for 220/240 VAC: 3.15 amp slo blow. Size: 5mm X 20mm Fusion 3502s Combining a JD 302CRC and a JD 502CRC has resulted in the Fusion 3502 S. With a flick of a switch, you can set your amplifier up to operate 6550, KT 88, KT 120, KT 150 or EL34 Vacuum Tubes. The circuit has been redesigned and placed the same venerable steel chassis. Parts of the unit have been upgraded to include ESA clarity coupling caps, high speed diodes and DC voltage to the preamplifier tubes which lowers the noise floor and enhances clarity, air and dimensionality. Flexibility is not only the Vacuum Tubes, the Fusion 3502 has a bypass that allows the amp to be utilized as a power amp. You choose the tubes you want with your order. And for the best part, a clear, smooth sound with the 3 dimensional air that vacuum tubes can deliver. Rated Output Power:60 W per channel at 8 ohms, 25Hz to 60KHz with 6550 vacuum tubes 50 W per channel at 8 ohms, 28Hz to 72KHz with EL34 vacuum tubes Maximum Power Output:85 W per channel at 8 ohms, 1KHz with 6550 Tubes 75 W per channel at 8 ohms, 1KHz with EL34 Tubes Frequency Response:(at 1 watt into 8 ohms) 8Hz to 130KHz + 1dB Bandwidth:15Hz to 80KHz + 3dB; 0dB 60 W 1KHz Distortion THD:Less than 1% at 20 V output, 28Hz to 15KHz Circuit Type:Ultra Linear, Class AB Input Impedance:100Kohms Input Sensitivity:600mV at 1KHz for 50/60 watt output Output Impedance:4 ohms and 8 ohms Negative Feedback:Less than 5 dB Noise and Hum:91 dB below rated output Tube Complement:4 pcs. EL34 or 6550 power output; 2 pcs. 12AX7A/ECC83 pre-amplifier; 2 pcs. 12AT7/ECC81 power drivers Power Requirements:110V-120 VAC 60Hz 180 watts-standby, 450 watts maximum (220 VAC 50Hz option) Dimensions:17 inches (43cm) wide by 15 inches (38cm) deep by 7.5 inches (19 cm) high Weight:51 pounds (18 Kg) net, approximately 55 pounds (21 Kg) packaged Bias Settings:400 millivolts + 40 mV For EL 34s ot 500 millivolts + 50 mV for 6550s Fuse:110 - 120 VAC, 6.3 Amp slo Blo; 200 - 240 VAC, 3.15 Amp Slow Blow Size 5mm X 20mm Fusion 1102 Small in stature, large in performance. This updated version of the popular JD 102BRC sees the addition of EZ-biasing and DC voltage to the filament of the vacuum tubes. With EZ biasing you turn the screw, the light goes on, the vacuum tube is biased. With DC volts the performance game is stepped up. The radical decrease in noise results in a fluid smooth clarity with a deep and wide soundstage. The elegant understated appearance works well with virtually any system and the small form factor makes the Fusion 1102 a great bookshelf amp. The Fusion 1102 has a big heart, delivering a surprising amount of juice even into difficult loads. Besides, the golden glow of those seven tubes will warm your heart, but not your room! Maximum power Output:25 W per channel at 8 ohms, 1KHz Rated Output Power:20 W per channel at 8 ohms, 26Hz to 50KHz Frequency Response:(at 1 watt into 8 ohms) 7Hz to 95KHz + 1dB; 0dB at 1KHz Bandwidth:14Hz to 80KHz + 3dB; 0dB = 20 W 1KHz, 8 ohms Distortion THD + N:Less than 1% at 15W output, 39Hz to 10KHz, 8 ohms Circuit Type:Ultra Linear, Class AB1 Input Impedance: 100 dB Distortion THD: Less than .02% Input Impedance: 100Kohms Output Impedance: 47 Kohms Tube Complement: 2 pcs. 12AX7 Power: 110 VAC, fuse 5 x 20 mm 1 amp slo blow 220 – 240 VAC, fuse 5 x 20 mm 0.5 amp slo blow Power consumption: 15 w Size: 17 in. (W) x 13 in. (D) x 2.5 in. (H) Box Size: 20 in. (W) x 23 in. (D) x 10 in. (H) Weight: 14 lbs., 18 lbs. Boxed Warranty: One year parts and labor, six months on vacuum tubes DAC Specifications: USB: 24/96 up sampling to 192 Hz Toslink and coaxial: 24/192HzD Galvanic Isolation: ADuM 1250 chips Asynchronous Burr Brown Chip AD1896 DAC Chip: PCM 1798 All signal inputs are isolated DAC chip directly transmits analog signal to SRPP Tubes Bluetooth Frequency: 2.4 G Bluetooth V2.1 + EDR , Aptx codec Bluetooth maximum reception distance is 35 feet. JD 5T Need a low cost vacuum tube preamplifier? The JD 5T might fill the bill. With a slim profile, this pre can provide the true tube sound that may audio listeners look for. Available in Silver and Black.Max Output voltage: 7 V Voltage Gain: 10 dB Frequency Response: 10Hz – 70KHz, (+/- 1 dB) SNR: > 100 dB Distortion THD: Less than .02% Input Impedance: 100Kohms Output Impedance: 600ohms Tube Complement: 2 pcs. 12AX7 Size: 17 in. (W) x 13 in. (D) x 2 in. (H) Weight: 11 lbs., 13 lbs. Boxed Construction Details and Features: Multiple Inputs: Tuner, DVD, CD, and Aux Two RCA Outputs. State of the Art Components: High quality Alps blue potentiometer, gold plated RCA input jacks, R core power supply. Remote Control has four functions: Standby, V+, V-, and Mute. Low profile full body allows the unit to act as a base for your amplifier or turntable. No need to lose another shelf for a component. JD 9 II Phono Preamp If vinyl is a source of enjoyment, then the JD9II is a versatile and easy to use tube unit that is sure to enhance your sound. Based on an earlier circuit we have improved the unit with a larger power supply, the addition a a robust voltage regulator, upgrade output capacitors and changes to the resistor arrays. With dim adjustments and two levels of output, you can easily configure the unit into your system, and then the fun begins.Frequency Response: 5Hz to 110KHz, (+/- 1 dB) SNR: > 100 dB Distortion THD: Less than .01% Input Impedance: 100Kohms Output Impedance: 600 ohms Phono Stage: MM: 60 dB, 5 mV MC High: 75 dB, 0.5 mV – 1.5 mV MC Low: 85 dB, 0.25 mV – 0.5 mV Input Resistance: 100 ohm, 300 Ohm, 1Kohm, 47Kohm Input Capacitance 47 PF, 100PF, 150PF, 220PF Tube Complement: 2 pcs. 12AX7 Size: 17 in. (W) x 13 in. (D) x 2 in. (H) Weight: 10 lbs., 14 lbs. Boxed Warranty: One year parts and labor, 3 months on tubes Construction Details and Features: Phono pre-amplifier that will handle MM, MC and Dynamic head cartridges. Lowest Rated sensitivity at .25 mV – 85 dB. Low noise -57 dB Two Outputs RIAA, Line stage. Adjustable settings for cartridge type State of the Art Components: Gold plated RCA input jacks. R Transformer and Heavy duty Voltage Regulator Low profile full body allows the unit to act as a base for your amplifier or turntable. No need to lose another shelf for a component. Tube Output JD 1000 P 100 watts per channel of hi-performance sound. This amp has the power to drive 82 dB sensitivity speaker. It has drive and dynamics to make full symphonies or hard rock come to exciting life. But this amplifier has a gentle side as well and can deliver all the nuances of a delicate sound. Clear, robust bass with smooth highs and an image as large as your room in a value priced package. The EZ-Biasing system make the operation and the maintenance of the JD 1000 BRC a simple matter. Rated Output Power: 100 W per channel at 8 ohms, 25Hz to 70KHz Maximum Power Output: 150 W per channel at 8 ohms, 1KHz Frequency Response: (at 1 watt into 8 ohms) 8Hz to 130KHz + 1dB Bandwidth: 13Hz to 80kHz + 3dB; 0dB 100 W 1KHz Distortion THD: Less than 1% at 100 W output, 28Hz to 15KHz Circuit Type: Ultra Linear, Class AB1 Input Impedance: 100Kohms Input Sensitivity: 2 V at 1KHz and 8 ohms for 100-watt output Output Impedance: 4 ohms and 8 ohms Negative Feedback: Less than 5 dB Noise and Hum: 85dB below rated output Tube Complement: 4 pairs (8) of 6CA7/EL34 power output; 2 pcs. 12AX7 pre-amplifier; 2 pcs. 12AT7/ECC81 power drivers. Power Requirements: 110V-120 VAC 60Hz 90 watts-standby, 240 watts maximum (220 VAC 50Hz option) Dimensions: 17 1/8 inches wide by 16 inches deep by 9 7/16 inches high Weight: 70 pounds net, approximately 75 pounds packaged Warranty: Two year limited parts and labor. One year or 1000 hours whichever comes first on Jolida Tubes. Bias Settings: 400 millivolts + 40 mV Fuse: 110 - 120 VAC, 6.3 Amp Slo Blow; 200 - 240 VAC, 3 Amp Slo Blow Fusion 3502P Power AmplifierTechnical Specifications Fusion 3502 P Maximum Power Output: 85 W per channel at 8 ohms, 1KHz with 6550 Tubes 75 W per channel at 8 ohms, 1KHz with EL34 Tubes Rated Output Power: 60 W per channel at 8 ohms, 25Hz to 60KHz with 6550 Tubes 50 W per channel at 8 ohms, 28Hz to 72KHz with EL 34 Tubes Frequency Response: (at 1 watt into 8 ohms) 8Hz to 130KHz + 1dB Bandwidth: 15Hz to 80KHz + 3dB; 0dB 60 W 1KHz Distortion THD: Less than 1% at 20 V output, 28Hz to 15KHz Circuit Type: Ultra Linear, Class AB Input Impedance: 100Kohms Input Sensitivity: 2 V at 1KHz for 60 or 50 watt output Output Impedance: 4 ohms and 8 ohms Negative Feedback: Less than 5 dB Noise and Hum: 90dB below rated output Tube Complement: 4 pieces of 6550/KT88 or 4 pieces of EL34 power outputTubes; 2 pcs. 12AX7A/ECC83 pre-amplifier; 2 pcs. 12AT7/ECC81 power drivers. Power Requirements: 110V-120 VAC 60Hz 180 watts-standby, 450 watts maximum (220 VAC 50Hz option) Dimensions: 17 inches (43cm) wide by 15 inches (38cm) deep by 7.5 inches (19 cm) high Weight: 50 pounds (18 Kg) net, approximately 55 pounds (21 Kg) packaged Warranty: Two year limited parts and labor. One year or 3000 hours whichever comes first on Tubes. Bias Settings: 500 millivolts + 50 mV for 6550s, or 400 millivolts + 40 mV for EL34s Fuse: 110 - 120 VAC, 6.3 Amp slo blo; 200 - 240 VAC, 3 Amp slo blo Size 5mm X 20mm Construction Details and Features: Stereo Power Amplifier: Input 2 V driving 60 watts (6550 tubes) or 50 watts (EL34 tubes) output, maximum 90 watts (6550 tubes) or 80 watts (El34 tubes) output. Multiple Inputs: RCA and XLR inputs. Custom Wound Audio Transformers with a core of German grain oriented silicon steel. 15th generation proprietary design. Secondary can be configured for a 4 ohm or 8 ohm load. Top panel bias testing terminal with bias adjustment controls plus EZ-biasing. State of the Art Components: Hexfred Diodes, carbon composite grid resistors, custom coupling cap., Alps blue potentiometer. Low Feedback Design: Only 3 dB JD 1501 P A power amplifier with a tube buffer stage to clean up the input signals coming in. Speed, dynamics, power and a large soundstage are the audio characteristics of this value package. A power amplifier that will not disappoint.Rated Output Power: 100 W per channel at 8 ohms, 22Hz to 19KHz 180 W per channel at 4 ohms 22Hz to 10KHz Frequency Response: (at 1 watt into 8 ohms) 10Hz to 35KHz + 1dB Bandwidth: 22Hz to 19kHz + 3dB; 0dB 100 W 1KHz Distortion THD: Less than 0.1% at 100 W output, 22Hz to 18KHz Input Impedance: 47Kohms Input Sensitivity: 2V at 1KHz and 8 ohms for 100-watt output Noise and Hum: 90dB below rated output Tube Complement: 2 pcs. 12AX7 for the preamplifier Power Requirements: 110V-120 VAC 60Hz 180 watts-standby, 450 watts maximum (220 VAC 50Hz option) Dimensions: 17 inches wide by 13 inches deep by 4 inches high Weight: 32 pounds net, approximately 33 pounds packaged Warranty: 18 months limited parts and labor. Six months or 1000 hours whichever comes first on Jolida Tubes. Fuse: 110 – 120 VAC, 6.3 Amp slo Blow; 200 – 240 VAC, 3.15 Amp slo Blow Construction Details and Features: Hybrid Stereo Power Amplifier: Input 2 V driving 100 watts Multiple Inputs: RCA or XLR. State of the Art Components: ALPS audio potentiometer, gold plated RCA input jacks, audiophile grade ceramic composite grid resistors, high speed soft recovery diodes, poly coupling capacitors. E-Z biasing system: Hi-performance, minimal effort. Low Feedback Design: Only 5 dB Comes in Black or Silver Glass FX Tube DAC DSD Output Level:0 V to 2.3V (±1dB, 47K ohms) (SIN SIGNAL 0dB SPDIF IN) Frequency Response:20-20 KHz (±0.5dB) Bandwidth:10Hz to 70kHz + 1dB SNR:>90dB (20Hz-20kHz) Dynamic Range:126 dB Distortion THD:Less than 0.01% (1kHz) Headphone Impedance:30 Ohms Circuit Type:Ultra Linear, Class AB Tube Complement:2 pcs. 12AX7 pre-amplifier Power Requirements:110V-120 VAC 60Hz 90 watts-standby, 240 watts maximum (220 VAC 50Hz option) Dimensions:8 inches wide by 7 inches deep by 3 inches high Weight:7.5 lbs net, approximately 10 lbs. packaged Warranty:6 month limited parts and labor. Three months on the tubes Fuse:110 - 120 VAC, 1 Amp slo Blo; 200 - 240 VAC, .5 Amp Slo Blo Construction Details and Features: Amplification of Analog Signal done exclusively via Vacuum tubes. PCM: 32Bit/384KHz DSD: DSD 64/DSD 128 Asynchronous Burr Brown Chip AD1896 DAC Chip: PCM 1795 R Style Transformer State of the Art Components: Glass FX Tube DAC III A DAC with a heart of glass and no solid state op amps in the signal path. This unit will maintain the purity of your digital sound with the latest in chip technology, galvanic isolation and circuit design giving you the smooth and rich analog sound only vacuum tubes can deliver. Output Level: 0 V to 2.3V (±1dB, 47K ohms)(SIN SIGNAL 0dB SPDIF IN) Frequency Response: 20-20 KHz （±0.5dB） Bandwidth: 10Hz to 70kHz + 1dB SNR ＞90dB ( 20Hz-20kHz) Dynamic Range 126 dB Distortion THD: Less than 0.01% (1kHz) Headphone Impedance 30 Ohms Circuit Type: Ultra Linear, Class AB Tube Complement: 2 pcs. 12AX7 pre-amplifier Power Requirements: 110V-120 VAC 60Hz 90 watts-standby, 240 watts maximum (220 VAC 50Hz option) Dimensions: 8 inches wide by 7 inches deep by 3 inches high Weight: 7.5 lbs net, approximately 10 lbs.packaged Warranty: 6 month limited parts and labor. Three months on the tubes Fuse: 110 - 120 VAC, 1 Amp slo Blo; 200 - 240 VAC, .5 Amp Slo Blo Construction Details and Features: USB: 24/96 up sampling to 192 Hz Toslink and coaxial: 24/192Hz Galvanic Isolation: ADuM 1250 chips Asynchronous Burr Brown Chip AD1896 Volume control and headphone jack DAC Chip: PCM 1798 R Style Transformer State the Art Components: capacitor filters, gold plated RCA jacks, Glass FX Tube DAC III W A DAC with a heart of glass and no solid state op amps in the signal path. This unit will maintain the purity of your digital sound with the latest in chip technology, galvanic isolation, and a circuit design giving you the smooth and rich analog sound only vacuum tubes can deliver. With Bluetooth wireless your music is only a few clicks away from your smart phone or computer. Output Level: 0 V to 2.3V (±1dB, 47K ohms)(SIN SIGNAL 0dB SPDIF IN) Frequency Response: 20-20 KHz （±0.5dB） Bandwidth: 10Hz to 70kHz + 1dB SNR ＞90dB ( 20Hz-20kHz) Dynamic Range 126 dB Distortion THD: Less than 0.01% (1kHz) Headphone Impedance 30 Ohms Circuit Type: UltraLinear, Class AB Tube Complement: 2 pcs. 12AX7 pre-amplifier Power Requirements: 110V-120 VAC 60Hz 90 watts-standby, 240 watts maximum (220 VAC 50Hz option) Dimensions: 8 inches wide by 7 inches deep by 3 inches high Weight: 7.5 lbs net, approximately 10 lbs.packaged Warranty: 6 month limited parts and labor. Three months on the tubes Fuse: 110 - 120 VAC, 1 Amp slo Blo; 200 - 240 VAC, .5 Amp Slo Blo Glass FX Tube Headphone Amplifier Two 12AX7A vacuum tubes driving a pair of headphones, what could be better. Air, openness and richness even at low playing volumes. Adjustable bass and loudness switches add flexibility to the sound you want. Try out how vacuum tubes can bring the a new natural to your ears. Rated Output Power: 100 mW at a load of 32 ohms Frequency Response: (at 1 watt into 8 ohms) 5Hz to 100KHz + 1dB Bandwidth: 20Hz to 100kHz + 1dB Distortion THD: Less than 0.1% at 100mW output, 32 ohm load Input Impedance: 32 ohms Output Impedance: 32 to 300 ohms Input Sensitivity: 450mV SNR: 85dB Tube Complement: 2 pcs. 12AX7 Power Requirements: 110V-120 VAC 60Hz, 220 VAC 50Hz option Dimensions: 7 inches wide by 6 inches deep by 4 inches high Weight: 8 pounds (3.65 Kg) net, approximately 11 pounds (5 Kg) packaged Fuse: 110 – 120 VAC, 1 Amp Fast Blo; 200 – 240 VAC, 0.5 Amp Fast Blow Construction Details and Features: Fully Integrated Vacuum Tube Headphone Amplifier: Input 450mV driving 100 mW. State of the Art Components: ALPS audio potentiometer, two sets gold plated RCA input jacks, and front panel minijack input. Bass and Treble boost controls Glass FX 10 Smooth, rich and holographic sound from a 7 inch cube with a removable safety glass cover. A small but feature laden integrated vacuum tube amplifier, the unit has automatic biasing, can easily push 89 dB speakers, remote control, inputs of two RCA sets and one mini-jack with and 4 and 8 ohm speaker posts. Yes, it does come with the blue tube lights.Rated Output Power: 10 W per channel at 8 ohms, 26Hz to 50KHz Frequency Response: (at 1 watt into 8 ohms) 17Hz to 37KHz + 1dB; 0dB at 1KHz Bandwidth: 14Hz to 50KHz + 3dB; 0dB = 10 W 1KHz, 8 ohms Distortion THD + N: Less than 1% at 10 W output, 39Hz to 10KHz, 8 ohms Circuit Type: Ultra Linear, Class AB1 Input Impedance: = or < 100Kohms Input Sensitivity: Max. 670 mV for 10 watt output at 1KHz Output Impedance: 4 ohms and 8 ohms Negative Feedback: Less than 3 dB Signal & Noise Ratio S/N: 81dB below rated output from 10Hz to 20Khz . Tube Complement: 2 matched pairs (4) of EL84 power output; 2 pcs. 12AX7 pre-amplifier. Power Requirements: 110V-120 VAC 60Hz or 220-240 VAC 50Hz Bias Settings: Self biasing Dimensions: 8 inches wide by 7 inches deep by 7 inches high. Weight: 12 pounds net, approximately 16 pounds packaged. Fuse: For 110/120 VAC: 2 amp fast blo, for 220/240 VAC: 1 amp fast blo, Size: 5mm X 20mm Fusion DAC Transport Pure tube, no op amps in a DAC that has a transport for CD playing as well. With a fully balanced circuit and six tubes in the signal path, this player will bring definition in clarity without any loss of smoothness. Transparency and air without any sacrifice of richness. Parts are of first grade quality and we have taken the worry out of chip obsolescence; should we upgrade the chips, it will be just a matter of changing the board. Time to see what tubes and a Hi-performance circuit will have on your digital music. Frequency Response: 20-20KHz ± 0.5dB + 0.5dB S/N Signal to Noise Ratio: > 98dB THD + N Distortion: ≤0.02% （Balanced signal 1KHz Channel Separation: > 96dB (1KHz) Analog Output Signal Balanced XLR, Unbalanced RCA Line Output Voltage: Balanced signal output 5.0V, 47Kohms Line Output Voltage: Unbalanced 2.5V, 47Kohms Digital Output: 0.5Vpp, 75 ohms Tubes : 6 pcs. 12AX7 *2,12AT7*2,12AU7*2 Power: 110V or 220V AC 50Hz/60Hz Power Consumption: 30 watts Fuse: 1.0 amp fast blo (size 5mm X 20mm) for 110/120 VAC --- 0.5 amp fast blo for 220/240 VAC Size: 17 in. wide by 12 in. deep and 3.5 in. high Weight: 28 pounds Warranty: 12 months on the chassis, 6 months on the vacuum tubes. Parts and labor Stereo configured in Dual MonoTube Circuit (Fully Balanced Circuit) XLR and RCA outs Full aluminum chassis Dac Board can be interchanged with future upgraded boards Upgraded part such as ESA clarity caps, ultra fine cast wire in the signal path. Full Metal Remote Control Phillips Transport Input Signal CD Disc, USB, Coaxial or Toslink In terms of function, the DAC Transport can operate as a stand alone DAC with USB, Toslink and Coaxial inputs. Digital Output signal toslink or Coaxial 2 pieces premium Tungsol 12AU7 preamplifier vacuum tubes. 2 pieces premium Tungsol 12AT7 driver vacuum tubes 2 pieces premium Tungsol 12AX7 driver vacuum tubes DAC Specifications Main IC Chip USB Power Isolation ADMU4160 USB Receiver TE7022 24BIT/96K SPDIF Receiver CS8416 24BIT/192K Asynchronous Sampling AD1896 24BIT/192K D/A Convert PCM 1794 24BIT/192K FOZ SS-X Sound Stage ExpanderFrequency Response:2 Hz to 200 KHz - 3dB Distortion THD:Less than 1% at 20 V output, 28Hz to 15KHz Tube Complement:1 pc. 12AU7 Power Requirements:110V-120 VAC 60Hz 180 (220 VAC 50Hz option) Dimensions:9.25 inches (24 cm) wide by 5,75 inches (14.5cm) deep by 2.5 inches (6.5 cm) high Weight:4.75 pounds (2.1 Kg) net, approximately 6 pounds packaged Warranty:One year limited parts and labor. Six months or 500 hours whichever comes first on Jolida Tube. Fuse:110 - 120 VAC, .5 Amp slo Blo; 200 - 240 VAC, .25 Amp slo Blo Size 5mm X Power Requirements:110V-120 VAC 60Hz 90 watts, 240 watts maximum (220 VAC 50Hz option) FOZ XT-R Crosstalk ReducerGain:Unity Input Z:71K Output Z:400 ohms SNR:> then 90DB "A weighted" Distortion THD:Less than 0.25% (1kHz) Perfect Square wave response, no ringing or overshoot. Frequency response DC to 200KHZ +0 -3DB Phase inverting Distortion THD:Less than 0.25% (1kHz) Power Requirements:110V-120 VAC 60Hz 90 watts, 240 watts maximum (220 VAC 50Hz option) Dimensions:8 inches wide by 7 inches deep by 3 inches high Weight:2 lbs net, approximately 3.5 lbs. packaged Fuse:110 - 120 VAC, 0.1 Amp slo Blo; 200 - 240 VAC, 0.05 Amp Slo Blo Try out most of our Products Risk Free with our 45 Day In Home Trial. We cover shipping both ways for Members! (Membership is free, sign up below)Location21310 Ridgecroft DriveBrookeville, MD 20833HoursMonday — Friday9:00 am — 5:00 pm e.s.tSaturday —[email protected](301) 953-2014 Lifetime Technical Support on all Black Ice Audio Products!